Steps
1. Peel the tape that secures the fan (A) cable to the system board.
2. Disconnect the fan (A) cable from the system board.
3. Remove the two screws (M1.6x2.5) that secure the fan (A) to the system board.
4. Lift the fan (A) off the system board.
5. Peel the tape that secures the fan (B) cable to the system board.
6. Disconnect the fan (B) cable from the system board.
7. Remove the two screws (M1.6x2.5) that secure the fan (B) to the system board.
8. Lift the fan (B) off the system board.
22
Removing and installing components
To Next Page
Loading...
