Table 3. System setup options—System information menu (continued)
Overview
Microcode Version Displays the microcode version.
Intel Hyper-Threading Capable Displays whether the processor is Hyper-Threading (HT) capable.
64-Bit Technology Displays whether 64-bit technology is used.
MEMORY
Memory Installed Displays the total computer memory installed.
Memory Available Displays the total computer memory available.
Memory Speed Displays the memory speed.
Memory Channel Mode Displays single or dual channel mode.
Memory Technology Displays the technology that is used for the memory.
DIMM SLOT 1 Displays the memory card installed in slot 1
DIMM SLOT 2 Displays the memory card installed in slot 2
DEVICES
Panel Type Displays the Panel Type of the computer.
Video Controller Displays the integrate graphics information of the computer.
Video Memory Displays the video memory information of the computer.
Wi-Fi Device Displays the Wi-Fi device installed in the computer.
Native Resolution Displays the native resolution of the computer.
Video BIOS Version Displays the video BIOS version of the computer.
Audio Controller Displays the audio controller information of the computer.
Bluetooth Device Displays whether a Bluetooth device is installed in the computer.
Pass Through MAC Address Displays the MAC address of the video pass-through.
Table 4. System setup options—Boot options menu
Boot options
Boot Sequence
Boot Mode: UEFI only Displays the boot mode of this computer.
Boot Sequence Displays the boot sequence.
Secure Digital (SD) Card Boot
Enable Secure Digital (SD) Card Boot Enables or disables Secure Digital (SD) Card Boot
Default: ON
Secure Boot Enables or disables Secure Boot
Default: OFF
Expert Key Management Allows databases to be manipulated
Table 5. System setup options—Integrated Devices
Integrated Devices
Date/Time
Date Sets the computer date in MM/DD/YYYY format. Changes to the date take
effect immediately.
56 System setup
To Next Page
Loading...
