Table 5. System setup options—Integrated Devices (continued)
Integrated Devices
Time Sets the computer time in HH/MM/SS 24-hour format. You can switch
between 12-hour and 24-hour clock. Changes to the time take effect
immediately.
Camera
Enable camera Enables or disables camera
Default: CHECKED
Enable Audio
Enable Audio Enables or disables all integrated audio controller.
Default: ON
Enable Microphone Enables or disables microphone.
By default, Enable Microphone is selected.
Enable Internal Speaker Enables or disables internal speaker.
By default, Enable Internal Speaker is selected.
USB/Thunderbolt Configuration
USB/Thunderbolt Configuration Enables or disables booting from USB mass storage devices such as external
hard drive, optical drive, and USB drive.
By default, Enable USB Boot Support is selected.
By default, Enable External USB Ports is selected.
Enable Thunderbolt Technology Support Enables or disables Thunderbolt Technology Support.
Default: ON
Enable Thunderbolt Boot Support Enables or disables Thunderbolt Boot Support.
Default: OFF
EnableThunderbolt (and PCIe behind
TBT) pre-boot modules
Enables or disables to allow or disallow PCIe devices to be connected through
a Thunderbolt adapter during pre-boot.
Default: OFF
Disable USB4 PCIE Tunneling
Disable USB4 PCIE Tunneling Enables or disables USB4 PCIe Tunneling.
Default: OFF
Video/Power only on Type-C Ports Limits TYpe-C functionality to video or power only
Default: OFF
Video/Power only on Type-C Ports Enables or disables USB4 PCIe Tunneling.
Default: OFF
Miscellaneous Devices Enables or disables various onboard devices.
Enable Camera Enables or disables the camera.
By default, Enable Camera is selected.
Touchscreen Enables or disables the touchscreen.
By default, Touchscreen is selected.
Enable Fingerprint Reader Device Enables or disables the Fingerprint Reader Device.
By default, Enable Fingerprint Reader Device is selected.
System setup 57
To Next Page
Loading...
