18 | Replacing the Back Cover
Replacing the Back Cover
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Place the back cover over the inner frame and slide the back cover toward the
bottom of the computer.
2 Tighten the captive screws that secure the back cover to the inner frame.
3 Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 18 Wednesday, April 3, 2013 1:39 PM
To Next Page
Loading...
