Replacing the Hard-Drive Cage | 39
Replacing the Hard-Drive Cage
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the hard-drive cage with the screw holes on the
middle cover.
2 Replace the screws that secure the hard-drive cage to the middle cover.
Postrequisites
1 Follow step 2 to step 3 in "Replacing the Hard Drive" on page 37.
2 Replace the stand. See "Replacing the Stand" on page 22.
3 Replace the back cover. See "Replacing the Back Cover" on page 18.
4 Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 39 Wednesday, April 3, 2013 1:39 PM
To Next Page
Loading...
