90 | Removing the Display Panel
Procedure
1 Disconnect the power-button cable, speakers cable, camera cable, input
source/display-settings controls cable, wireless keyboard/mouse receiver cable,
LVDS cables, and touchscreen cable from the system board and remove the cables
from their routing guides.
2 Disconnect the antenna cables from the wireless mini-card and remove the
antenna cables from their routing guides.
3 Remove the screw that secures the grounding cable to the processor cooling vents.
1 speakers cable 2 input source/display-settings controls
cable
3 wireless keyboard/mouse receiver cable 4 power-button cable
5 LVDS cable (LVDS1) 6 LVDS cable (LVDS2)
7 touchscreen cable 8 antenna cables (2)
9camera cable
1
2
3
4
5
6
7
8
9
OM_Book.book Page 90 Wednesday, April 3, 2013 1:39 PM
To Next Page
Loading...
