Removing the Display Panel | 91
4 Remove the screw that secures the grounding cable from the right-speaker mesh
to the middle cover.
5 Remove the screws that secure the system board to the side I/O-board.
6 Remove the screws that secure the side I/O-board shield to the display bezel
and remove the side I/O-board shield.
1 side I/O-board shield 2 screw (4)
3 grounding cable 4 grounding-cable screw
5 processor cooling-vents grounding cable 6 grounding-cable screw
OM_Book.book Page 91 Wednesday, April 3, 2013 1:39 PM
To Next Page
Loading...
