82 | Removing the Side I/O-Board
Procedure
1 Remove the screws that secure the side I/O-board shield to the display bezel.
2 Lift the side I/O-board shield off the side I/O board.
3 Gently lift the side I/O-board starting from the inner edge and then ease the ports
on the side I/O-board out of the slots on the display bezel.
1 grounding cable 2 side I/O-board
3 screws (2) 4 side-I/O-board shield
1 side I/O-board
2
1
3
4
OM_Book.book Page 82 Wednesday, April 3, 2013 1:39 PM
To Next Page
Loading...
