Removing the Power-Button Assembly | 75
Procedure
1 Disconnect the power-button cable from the system board.
2 Note the routing of the power-button cable and remove the power-button cable
from its routing guides.
3 Remove the screws that secure the power-button assembly to the display bezel.
4 Press the power button inward to release it from the slot on the display bezel and
then gently lift the power-button assembly off the display bezel.
1 power-button cable 2 power-button assembly
3screws (2)
2
3
1
OM_Book.book Page 75 Wednesday, April 3, 2013 1:39 PM
To Next Page
Loading...
