94 | Removing the Display Panel
9 Pull the tab and disconnect the ribbon cables from the display assembly.
10 Peel off the tapes securing the ribbon cables to the display assembly.
11 Remove the screws that secure the display assembly to the display bezel.
12 Lift the display assembly from the chassis.
1 tabs (4) 2 ribbon cables (4)
3 tape 4 screws (6)
5 display assembly
2
1
4
3
5
OM_Book.book Page 94 Wednesday, April 3, 2013 1:39 PM
To Next Page
Loading...
