Removing the antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the right-side cover.
2 Follow the procedure from step 1 to step 2 in “Removing the power-supply unit”.
3 Remove the top cover.
4 Follow the procedure from step 1 to step 4 in Removing the wireless card.
Procedure
1 Open the securing clip which secures the antenna cable to the chassis.
2 Remove the cables from the routing guide through the slot on the top of the
chassis.
110
To Next Page
Loading...
