Replacing the antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Adhere the antenna to the chassis.
2 Route the antenna cables through the slot on the top of the chassis.
3 Route the antenna cables through the routing guides on the chassis.
4 Secure the antenna cables to the chassis using the securing clip.
Post-requisites
1 Follow the procedure from step 3 to step 5 in “Replacing the wireless card”.
2 Replace the top cover.
3 Follow the procedure from step 9 to step 10 in “Replacing the power-supply
unit”.
4 Replace the right-side cover.
113
To Next Page
Loading...
