Removing the graphics card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
NOTE: Your computer will be shipped with either graphics card or full-length
graphics card.
1 Remove the right-side cover.
2 Follow the procedure from step 1 to step 2 in “Removing the power-supply unit”.
Procedure
1 Locate the graphics card on the system board and make note of the graphics-
card slot (PCI-Express x16).
For more information, see “System-board components”.
65
To Next Page
Loading...
