About this task
The following image(s) indicate the location of the front cover and provides a visual representation of the removal procedure.
Steps
1. Gently pry and release the front-cover tabs from the top, working down sequentially to the bottom-left tab.
2. Swing the front cover outwards, away from the chassis, and remove the cover.
Installing the front cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the front cover and provides a visual representation of the installation procedure.
16
Removing and installing components
To Next Page
Loading...
