DeLonghi DE60PYROS - Setting the Cooking with Programmer; Programmer Temperature Setting

18
The temperature set is shown on the electronic pro-
grammer display and can be varied, with 5 °C intervals,
by turning the potentiometer knob.
During the cooking the oven temperature is measured
by a sensor inside the cavity and is shown on the pro-
grammer display.
1. SELECTING THE COOKING FUNCTION
Turn the selector knob to the cooking function
required
The pre-set temperature appears on the program-
mer display.
°C flashes on the display for 3 seconds.
The heating elements start cooking immediately.
2. SETTING THE COOKING TEMPERATURE
The temperature can be changed when °C is flash-
ing on the display
2a.If °
C is not flashing press key 4 of the program-
mer.
2b.Press key 6 to increase the temperature or key
5 to reduce it.
The maximum temperature which can be set is
250 °C while the minimum temperature is 50 °C.
Note: When
°C becomes steady the value shown on
the display indicates the oven cavity temperature.
Caution: If a temperature below the minimum value
(50 °C) is set the system switches off automatically and
OFF appears.
In this case repeat the procedure from point 2.
3. SWITCHING OFF
Turn the selector knob to position 0 (oven OFF).
The programmer display shows the time.
SETTING THE COOKING (only for the cooking functions)
Way 2: SETTING THE COOKING TEMPERATURE WITH THE
PROGRAMMER
A
U
T
O
P
Function
selector knob
Programmer
Fig. 3.4
4
3
3
3
2
2
2
1
1
1
56
2a 2b
➁
➀
➂