PROGRAMMER
MESSAGE
MESSAGE MEANING WHAT TO DO
Start of the Pyrolysis cycle.
To increase the cycle length, up to
max 3 hours, press key 2 of the
programmer then key 6. To reduce
to the minimum 1 hour 30 minutes
press key 2 of the programmer
and then key 5.
AUTO flashing. End of the pyrol-
ysis cycle. This message remains
until the door unlocks.
Wait for the door to unlock.
P0.00 with P flashing.
This appears after do.Lo,
because the function selector
knob has been moved from the
Pyrolysis function to a cooking
function. The temperature has
dropped below 300°C. The key
LED goes out and the door
unlocks.
P0.00 with P flashing. The oven
selector knob has been moved
to the Pyrolysis function (P).
Turn the oven selector knob to 0
and repeat the operations to start
the Pyrolysis cycle.
To start the Pyrolysis cycle press
key 3 of the programmer.
To cancel the operation turn the
oven function selector knob to 0.
dEF = defrost
The “defrosting frozen food” func-
tion has been set.
To turn the oven off turn the func-
tion selector knob to 0.
End with AUTO flashing and
audible signal.
End of the programmed cooking.
Press any programmer key to
silence the audible signal OFF
appears (see specific note).
00.00 with bell symbol flashing
and audible signal. End of the
timer countdown.
Press any programmer key to
silence the audible signal. The
time appears.
Cooking time set or oven temper-
ature measured by the internal
sensor.
To change the cooking tempera-
ture press key 4 of the program-
mer, then keys 5 or 6.
A temperature below 50°C has been
set. The oven has switched off.
Press key 4 of the programmer,
then keys 5 or 6.
variable
The audible signal has switched
off after the end of cooking (End).
Turn the function selector knob to
0 The time will appear.
To Next Page
Loading...
