DeLonghi DE60PYROS - Cooking Advice; Sterilization, Regeneration, and Roasting

21
HOW TO STOP THE PYROLYSIS CYCLE
1. Turn the function selector to 0 (oven OFF)
- If the oven cavity temperature is higher than
300 °C
1a.
do•Lo (door locked) appears steadily on the pro-
grammer display.
1b.When the oven cavity temperature drops below 300°C:
- the time appears on the programmer display again
- the key pilot light goes out
- the door unlocks
- If the oven cavity temperature is lower than 300 °C
1c.The time appears on the programmer display
1d.After a technical time:
- the key pilot light goes out
- the door unlocks
ACCIDENTAL INTERRUPTION OF THE PYROLYSIS
CYCLE
2. The function selector has been turned to any
cooking function
- If the oven cavity temperature is higher than 300 °C
2a.
do•Lo (door locked) appears steadily on the pro-
grammer display.
2b.When the oven cavity temperature drops below 300°C:
-
P0•00 appears with P flashing
- the key pilot light goes out
- the door unlocks
3c.To reset normal conditions turn the function selector
to
0 (oven OFF). The time appears on the program-
mer display.
- If the oven cavity temperature is lower than 300 °C
3d.The time appears on the programmer display, or the
oven cavity temperature (caution: in this case the
heating elements are working).
3e.After a technical time:
- the key pilot light goes out
- the door unlocks
3f. To reset normal conditions turn the function selector
to
0 (oven OFF). The time appears on the program-
mer display.
I
I
I
I
I
I
I
I
II
I
I
I
I
I
I
2a
1a
1b
2b
3d
3d
➀
➁