24
2c.The oven function selector has been moved to 0
(oven OFF) to cancel the Pyrolysis cycle.
What to do:
1. Wait for the door to unlock. This happens automatically
when the temperature inside the oven has dropped
below 300 °C.
2. 2. The time appears and the oven can be used.
3. do.Lo appears during cooking
Oven not working properly.
What to do:
1. Turn the function selector to
0 (oven OFF),
2. Wait for the oven to cool down completely so that the
door opens
3. Disconnect the oven from the mains.
4. Call the After-Sales Service Centre.
4. Display OFF
Oven not working properly.
What to do:
1. Turn the function selector to
0 (oven OFF)
2. Wait for the oven to cool down completely so that the
door opens
3. Switch the oven off for a few seconds.
If after this procedure the display is still off:
4. Disconnect the oven from the mains.
5. Call the After-Sales Service Centre. The oven must not
be used.
To Next Page