4747
ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
• Fit the side runner frames into the
holes on the side walls inside the oven
(g. 8.6).
• Slide into the guides, the shelf and the
tray (g. 8.7).
The rack must be tted so that the
safety notch, which stops it sliding out,
faces the inside of the oven; the guard
rail shall be at the back.
• To dismantle, operate in reverse order.
Fig. 8.6
Stop notch
Guard rail
Fig. 8.7
OVEN TRAY
The oven tray must be inserted into the
side runners (g. 8.7).
Do not store ammable material in the oven or in the storage compartment.
STORAGE COMPARTMENT
The storage compartment is accessible through the pivoting panel (g. 8.8).
Fig. 8.8
To Next Page
Loading...
Need help?
General
