DeLonghi DTR 906-DF Series - Replacing the Oven Lamp; Oven Lamp Replacement Safety and Procedure; Lamp Specifications and Intended Use

4848
A
B
A
C
WRONG
CORRECT
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is
switched o󰀨 and disconnected from the
electrical power supply before replacing
the lamp to avoid the possibility of
electric shock.
• Let the oven cavity and the heating
elements cool down.
• Switch o󰀨 the electrical supply.
• Remove the protective cover “A” (g.
8.9).
• Replace the halogen lamp “C”
with a new one suitable for high
temperatures (300°C) having the
following specications: 220-240 V,
50-60Hz and same power (check watt
power as stamped in the lamp itself) of
the replaced lamp.
 IMPORTANT WARNING: Never
replace the bulb with bare hands;
contamination from your ngers can
cause premature failure. Always use a
clean cloth or gloves.
• Ret the protective cover.
Note: Oven lamp replacement is not
covered by your guarantee.
The intended purpose of the lamps, tted
on this appliance, is to illuminate the oven
cavity and thus help the user to better
monitor the food while cooking. These
lamps are not suitable for other usage (e.g.
environments lighting).
This product contains more than one light
source of energy e󰀩ciency class G.
Fig. 8.9