DeLonghi EC9155 - File Downloads

portafilter (Cl) ra
ther than the hol
es
The coffee filter is clogged
Rinse the filters under abundant running water.
Reduce the grinding thickness
The coffee crem
a is too light (del
ivered from the
spout too fast)
The appliance settings need revie
wing
Refer to Quick Guide for suggestions
The coffee crem
a is too dark (de
livered from the
spout too slowly
)
The appliance settings need revie
wing
Refer to Quick Guide for suggestions
At the end of de
scaling, the appl
iance requests
a further rinse
During the rinse cycle, the water ta
nk (A7) has not been filled to the
MAX level
Complete the rinse cycle from point (8) of section”9. De
scaling”
The appliance d
oes not grind th
e coffee
There is a foreign matter that cann
ot be ground in the coffee grinder
Turn the grinder selector (A2) to 8, vacuum all the bean
s and parties in the beans container (A3). If the problem
persists, address it to Customer Service Centre.
If you want to ch
ange the type of
coffee
You must remove all the beans pre
sent in the machine
Empty the beans container (A3) (if necessary,
operate the coffee mill without beans or use a vacuu
m cleaner to remove any remaining beans)
Attach the portafilter (C1) and operate the coffee mill
a number of times without beans to free the grinder.
Attach the portafilter to the outlet of the grinder (A13)
. Push the portafilter to start grinding: it stops automa
tically. Repeat until the filter is empty
Place the new coffee in the beans container
If the amount of coffee ground is not enough to reac
h the perfect dose, proceed setting the appliance as f
or the first use
After grinding, t
he coffee filter i
s empty
The coffee grinder funnel is clogge
d
See section “6. Cleaning the grinder”.
After grinding, t
he ground coffe
e in the filter do
es not reach the
“perfect dose”
The number of ground coffee need
s adjusting
Adjust the quantity of coffee with the dial (B4). If the dial
is already in the max. position, select the second range
of grinding adjustment (see “3. Menù settings”- “Extra g
rinding adjustment”).
Over time the burrs wear down Address to a Customer Service Centre to change burrs.
File Downloads