7. Empty the recipient used to collect the descaler
solution and replace it empty.
8. Remove the water tank, empty any residues of descaler s
olution, rinse
with running water and fill with fresh water up to the MAX lev
el. Put the tank back in its housing.
11. When rinsing is complete, delivery stops and the appliance prepares to be used again:
12. Empty the recipients used to collect the rinse water.
13. Extract and empty the drip tray (A19), then put it back in the appliance. 14. Empty, rinse, then fill the water tank with fresh water and replace it.
Now the appliance is ready to use.
USING THE SOFTBALLS (*SOME MODELS ONLY)
To Next Page
Loading...
