DeLonghi MAGNIFICA PLUS - Auto-Off; Coffee Temperature; Support; Cleaning the Milk Carafe

9
6.5 Auto-o
Auto-o can be set so that if the appliance is not being used, it
will switch o after 15 or 30 minutes or after 1 or 3 hours have
elapsed.
To programme Auto-o, proceed as follows:
1. Press the settings menu (C6) (g. 14);
2. Scroll through the menu pages until “Set Auto-o” is
displayed;
3. Select the desired time interval (15 or 30 minutes, or 1 or
3 hours).
4. Press "X" to save the new selection and go back to the
homepage (C).
6.6 Coee temperature
To change the temperature of the water used to make coee,
proceed as follows:
1. Press the settings menu (C6) (g. 14);
2. Scroll through the pages until the item “Coee tempera-
ture” is displayed;
3. Press “Set”;
4. Select the required temperature from those suggested;
5. Press “<” to go back to the settings menu.
Please note:
The eect of varying the temperature is most noticeable with
long drinks.
6.7 Support
1. Press the settings menu (C6) (g. 14);
2. Scroll through the menu pages until the item “Support” is
displayed;
3. Scan the QR code to see the manual and access support
services;
4. Press “X” to go back to the homepage (C).
6.8 Cleaning the milk carafe
The machine oers a tutorial on thorough cleaning of the milk
carafe (E), which will ensure smooth operation of the Lattecre-
ma system over time.
1. Press the settings menu (C6) (g. 14);
2. Scroll through the pages until the item “Cleaning the milk
carafe” is displayed;
3. Press “Next" or “Back” to read the sequence of steps;
4. At the last step, press “Done” to go back to the settings
menu;
5. Press “X” to go back to the homepage (C).
Please note:
The procedure is illustrated in section “Cleaning the milk carafe
(E)”.
6.9 Statistics
This function displays statistics relating to the machine. To view
the statistics, proceed as follows:
1. Press the settings menu (C6) (g. 14);
2. Scroll through the pages until the item “Statistics” is dis-
played along with the main statistical data: to view more
data, press “Read more”;
3. Press “<” to go back to the settings menu.
4. Press “X” to go back to the homepage (C).
6.10 Languages
To change the language on the homepage, proceed as follows:
1. Press the settings menu (C6) (g. 14);
2. Scroll through the pages until the item “Languages” is
displayed;
3. Press “Set”;
4. Press the ag corresponding to the desired language (scroll
through the pages to see all the languages available). the
display updates immediately and shows the selected
language;
5. Press "<" to save the new selection and go back to the
settings menu.
6.11 Coee grinder settings
The machine oers a tutorial on how to adjust the grinding and
ensure the best results:
1. Press the settings menu (C6) (g. 14);
2. Scroll through the pages until the item “Coee grinder set-
tings” is displayed;
3. Press “Read more” to view the tutorial on how to adjust for
ner or coarser grinding. Press“Next" or “Back” to read the
advice;
4. When at the nal page, press “Ok” to go back to the set-
tings menu;
5. Press “X” to go back to the homepage (C).
Please note:
• After completing the above procedure, at least 3 coees
should be made before making any further adjustment.
If coee delivery is still not correct, repeat the procedure.
• The adjustment dial (A2) must be turned only when the
coee grinder is in operation, during the initial step of pre-
paring the coee.
6.12 Water hardness
To change the default water hardness setting when the machine
is used for the rst time, proceed as follows:
1. Repeat the hardness test as indicated in the section “Meas-
uring water hardness”;
2. Press the settings menu (C6) (g. 14);
3. Scroll through the pages until the item “Water hardness”
is displayed.
4. Press “Set”.
5. Select the water hardness level on the display according to
the result of the test: the new setting will be stored.