Delta Controls
Access Door Module Page 25 of 26
COMPLIANCE DECLARATIONS
CE – DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: Delta Controls Inc.
Manufacturer’s Address: 17850 56
th
Avenue
Surrey, British Columbia, V3S 1C7
Canada
Declares that the product (s):
Product Name: Access Door Module
Model Numbers: ADM-2W704
Product Options: All
Conform to the following Product Specifications:
Generic Emission Standard Part 1: Light Industrial/Residential
Emission Requirements for Information Technology Equipment
AC Mains Conducted Emissions
EN 61000-3-2:2006+A2:2009
Generic Immunity Standard Part 1: Light Industrial/Residential
Immunity Requirements for Information Technology Equipment
RF Electromagnetic Field Immunity
Voltage Dips / Interruptions
Comply with the requirements of the following Directives:
The product was tested in a typical configuration to check conformity with the EMC directive.
To our best knowledge the product complies with the RoHS 2 Directive, which may or may not include
exemptions. Restricted substance amounts, if present, are below the required limits as shown in Table 1, on next
Lee Dickson
Director of Quality Assurance
February 26, 2015