Chapter 2 Creating and Editing Screens|ScrEdit Software User Manual
2-120 Revision Apr. 30th, 2007, 2007PDD23000002
Table 2.9.11 Environment Settings
Environment Dialog Box
System Path This is used to set the location where ScrEdit will save the system files, including some
system reference data and dynamic link library (*.dll) files. This option is set by system
default and it cannot be changed.
Output Path This is used to set the location where ScrEdit will save the output file after compile
operation. Some functions, such as on-line simulation, off-line simulation, file download
and upload all refer to the files in this location. In order to avoid a system error and
failure to find the file, we recommend the user not to change this setting if not necessary.
ToolBars/Windows It is used to set if toolbars or ducking windows display or not
display on the screen.
Language The user can choose English, Traditional Chinese and
Simplified Chinese from the “Language” drop-down list.
Upload/Download It is used to determine the communication interface for upload and
download. It can be USB or PC COM Port.
Auto Saving… Time
Interval
It is used to have ScrEdit automatically save the file every
specified number of minutes. The unit is M(minute) and the setting
range is within 0M ~ 120M.
Options
Auto Open for Next
Execute Application
It is used to have ScrEdit automatically open the specified file
every time the user executes ScrEdit.
To Next Page
Loading...
Need help?
General
