Delta Electronics A10 User Manual

Appendix B USB Flash Drive Function|ScrEdit Software User Manual
B-4 Revision Apr. 30th, 2007, 2007PDD23000002
Then, connect USB flash drive to HMI. After power in connected to HMI, power on HMI and a warning dialog
box will display as shown as Fig. B.7 on previous page. This warning message is used to remind the user
that the data transfer and copy only can be done via USB flash drive at this time.
After pressing OK button, it will return the original HMI screen. Then, press SYS (system) key on HMI panel
for three seconds and it will enter into the main menu of HMI system（） (Fig. B.8). Please touch the “File
Manager” option and enter into “File Manager” menu screen. When using a DOP AS series HMI, your “File
Manager” menu screen will look like Fig. B.9. When using a DOP AE series HMI, your “File Manager” menu
screen will look like Fig. B.10.
Fig. B.8

Delta Electronics A10 Specifications

General

Brand	Delta Electronics
Model	A10
Category	Monitor
Language	English