Chapter 7 InsightPower SNMP IPv6 for STS
27
Command Description Parameter Response
DevID Report the unit’s device ID. N/A <Device ID string>
Prefer Report the preferred source. N/A S1 or S2
Sens Report the sensitivity. N/A hi or low
Mode Report the operation mode. N/A Initialization
Diagnosis
Off
S1
S2
Safe
Fault
Vout Report the output voltage. N/A #.#
Iout Report the output current. N/A #.#
Vs1 Report the primary voltage. N/A #.#
Vs2 Report the secondary
voltage.
N/A #.#
Fs1 Report the primary
frequency.
N/A #.#
Fs2 Report the secondary
frequency.
N/A #.#
Vtp2s Report the primary to
secondary trip voltage.
N/A #.#
Vts2p Report the secondary to
primary trip voltage.
N/A #.#
Vbp2s Report the primary to
secondary brownout voltage.
N/A #.#
Vbs2p Report the secondary to
primary brownout voltage.
N/A #.#
Tdp2s Report the recover time
of transfer from primary to
secondary.
N/A #.#
To Next Page
Loading...
Need help?
General