Page 3 of 12
Copyright © 2020 Delta-Q Technologies Corp
ORIGINAL SAFETY AND OPERATING INSTRUCTIONS
This manual is for the Delta-Q Technologies IC Series Industrial Battery Chargers. Read and comprehend
this document fully before handling or working with any IC Series battery chargers. Important safety,
operating, and installation instructions are included. As well, this manual includes a link to a list of fault
codes and error codes that help engineers take steps quickly to resolve issues.
Read this information in its entirety before using your Delta-Q Technologies charger. Save these
instructions.
For technical support, contact the manufacturer or distributor of your vehicle or machine, as their version
of this charger may require unique operating instructions. For additional product documentation, see
www.delta-q.com/resources.
Warning
Use the charger only with a charging algorithm that is appropriate to the specific battery type
and capacity. Other usage may cause personal injury and damage. Lead acid batteries may generate
explosive hydrogen gas during normal charging. Keep sparks, flames, and smoking materials away from
batteries. If this charger is used with lithium-ion type batteries, an integrated battery management system
(BMS) must be used. The BMS must ensure that, in all operating modes, the battery cells are protected
from inappropriate levels of voltage, current, temperature, and state of charge. Do not operate the charger
in a closed-in area or restrict ventilation. Never charge a frozen or non-rechargeable battery. Observe all
battery manufacturers’ precautions (e.g., maximum charge rates and if cell caps should be removed
while charging).
Danger
Risk of electric shock. Connect charger power cord to an AC outlet that has been properly
installed and grounded in accordance with all local codes and ordinances. A grounded AC outlet is
required to reduce the risk of electric shock—do not use ground adapters or modify the plug. Do not touch
uninsulated portions of the output connector or uninsulated battery terminals. Disconnect the AC supply
before making or breaking the connections to the battery. Do not open or disassemble the charger. Do
not operate this charger if the AC supply cord or DC output cord is damaged or if the charger has
received a sharp blow, been dropped, or is damaged in any way. Refer all repair work to the manufacturer
or qualified personnel. This charger is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge on electrical systems and
battery charging, unless they have been given supervision or instruction concerning use of the charger by
a person responsible for their safety. Children should be supervised to ensure they do not play with the
charger.
To Next Page
Loading...
Need help?
General
