QOSY
97
Stand by Mode
Whenever the equipment is idle for over 15 minutes, it enters “Stand by” mode.
The boiler is turned o and the external surface of the machine cools down.
All the luminous indicators of the control panel buttons go out with the
exception of the Standby button which will remain on with a red light
(see Fig.17).
• When the user presses any extraction button again, the equipment leaves
Stand by mode, restarts the heating process and returns to the “Ready to
use” mode in around 1 minute (see Fig. 7).
Fig.17: Stand by mode.
To Next Page
Loading...
