Need help?Do you have a question about the Delta 2-speed heavy-duty wood shaper and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | 2-speed heavy-duty wood shaper |
| Category | Power Tool |
| Language | English |
Ensures electrical safety by proper grounding of the tool via three-prong plug.
Advises against loose clothing, jewelry, and recommends protective hair covering.
Instructs to feed work against the direction of the cutter rotation for safe shaping.
Details feeding work against cutter rotation for safe shaping operations.
Stresses the need for sufficient bearing surface on collars when shaping with a starting pin.
Advises adjusting the fence endwise to minimize opening around the cutter.
Guide for mounting the motor and connecting pulleys and belt for operation.
Instructions for attaching the table extension and ensuring it is level.
Guidelines for safely connecting the shaper to single-phase and three-phase electrical power sources.
Covers spindle height adjustment and the machine's start/stop switch functionality.
Details how to adjust motor and spindle pulley positions for speed changes and belt tension.
Method for performing straight work shaping using the fence for support and alignment.
Emphasizes smooth collars, sufficient bearing surface, and using heavy work for safety.
Discusses advantages and disadvantages of using collars above, below, or between cutters.
Details on high-speed steel 3-lip shaper cuttings with 1/2" spindle holes and involute relief design.
Information on standard, cove/bead, and sash/cabinet cutter and collar sets.
Listings for spacing collars with 1/2", 3/4", and 1" holes for various cutter applications.
Includes mobile base, safety ring guard, and fence guard assembly for the shaper.
Highlights features of carbide-tipped cutters, including material quality and design benefits.
Lists motor and spindle pulleys for converting the shaper to a two-speed model.
Specifications for cutters used for door edge details and bead/half round concave profiles.
Information on cutters for glue joints, wedge tongue/groove, and lock miter applications.
Details on cutters for male/female sash profiles and drawer joint applications.
Specifications for horizontal panel raising cutters and corresponding back cutters.
Information on a specific 8-cutter set for tongue/groove and panel cutting.
Lists ball bearing rub collars and T-bushings for adapting cutter bore sizes.
Outlines the terms and conditions of the limited warranty for Delta machines and accessories.
To Next Page
