To Next PageTo Next Page
Need help?Do you have a question about the Delta 14-651 and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | 14-651 |
| Category | Power Tool |
| Language | English |
Comprehensive safety guidelines for operating the woodworking machinery safely.
Introduction to the Delta Model 14-651 mortiser, highlighting its construction and features.
Instructions on how to unpack the machine and clean unpainted surfaces using kerosene and wax.
Steps to assemble the handle assembly and connect it to the pinion shaft for raising/lowering the head.
Instructions for assembling the hydraulic cylinder to the head and column fittings.
How to assemble the tool and chisel holder and store related accessories.
Guidance on securing the mortiser base to a supporting surface to prevent tipping or walking.
Step-by-step guide on inserting the bit into the chisel and securing it properly.
Detailed steps for adjusting the chisel and bit for proper clearance and cutting.
Instructions to extend the mortiser column by assembling the column extension piece.
Continues the steps for assembling the column extension, including securing the assembly.
How to turn the mortiser on and off using the power switch buttons.
Instructions on how to lock the switch in the off position to prevent unauthorized use.
How to adjust the depth stop rod to limit the chisel's cutting depth.
Instructions for moving and positioning the fence for workpieces.
How to adjust the holddown to secure the workpiece and prevent lifting.
How to adjust the chisel to be parallel to the workpiece for precise cuts.
Adjusting the dovetail gib for a snug sliding fit between the head and column.
Instructions for rotating the column 180 degrees for cutting workpieces off the table.
Guidance on using extra long bits, including removing the extension and using a chisel spacer.
Details of the Delta two-year limited warranty for machines, parts, and accessories.
Lists of Canadian service centers for Porter-Cable and Delta products.
