To Next PageTo Next Page
Need help?Do you have a question about the Delta ShopMaster JT160 and is the answer not in the manual?
Defines DANGER, WARNING, CAUTION symbols used in the manual for hazard identification.
Emphasizes reading the manual, wearing proper protection, and checking machine condition.
Addresses extension cords, grounding, and avoiding hazardous environments.
Stresses staying alert, using common sense, and taking dust inhalation precautions.
Details turning off the machine, disconnecting power, and cleaning the work area.
States the machine must be grounded to protect operators from electric shock.
Instructs on attaching the guard mounting bracket to the jointer base.
Notes the lock is for setting knives only and should be disengaged otherwise.
Details how to turn the machine ON and OFF using the switch.
Describes the variable speed control dial and its RPM settings.
Guides on using a straight edge and screws to set the knife height against the outfeed table.
Emphasizes using push blocks for safety when operating the jointer.
Reiterates using the cutterhead guard and push blocks for safety.
Details proper hand placement and movement for safe feeding of workpieces.
Strong warning against passing hands directly over the cutterhead.
Provides contact information for assistance with machine issues.
Details steps for removing the belt guard, releasing tension, replacing belt, and re-tensioning.
Provides contact information for parts, service, and warranty assistance.
Details the terms of the two-year limited warranty for new products and 180 days for refurbished.
Defines DANGER, WARNING, CAUTION symbols used in the manual for hazard identification.
Emphasizes reading the manual, wearing proper protection, and checking machine condition.
Addresses extension cords, grounding, and avoiding hazardous environments.
Stresses staying alert, using common sense, and taking dust inhalation precautions.
Details turning off the machine, disconnecting power, and cleaning the work area.
States the machine must be grounded to protect operators from electric shock.
Instructs on attaching the guard mounting bracket to the jointer base.
Notes the lock is for setting knives only and should be disengaged otherwise.
Details how to turn the machine ON and OFF using the switch.
Describes the variable speed control dial and its RPM settings.
Guides on using a straight edge and screws to set the knife height against the outfeed table.
Emphasizes using push blocks for safety when operating the jointer.
Reiterates using the cutterhead guard and push blocks for safety.
Details proper hand placement and movement for safe feeding of workpieces.
Strong warning against passing hands directly over the cutterhead.
Provides contact information for assistance with machine issues.
Details steps for removing the belt guard, releasing tension, replacing belt, and re-tensioning.
Provides contact information for parts, service, and warranty assistance.
Details the terms of the two-year limited warranty for new products and 180 days for refurbished.
General| Brand | Delta |
|---|---|
| Model | ShopMaster JT160 |
| Category | Power Tool |
| Language | English |
