Delta 37-071 - User Manual

37071
Canteador de banco
de 152 mm (6 pulg.)
Dégauchisseuse d’établi
de 152 mm (6 po)
Instruction Manual
Manuel d’utilisation
Manual de instrucciones
Français (20)
Español (38)
INSTRUCTIVO DE OPERACIÓN, CENTROS
DE SERVICIO Y PÓLIZA DE GARANTÍA.
LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
www.DeltaMachinery.com
6 IN. BENCH JOINTER

Delta 37-071 Specifications

General

Brand	Delta
Model	37-071
Category	Power Tool
Language	English

Summary

Additional Specific Safety Rules

Machine Assembly and Setup Safety

Cutterhead and Knife Safety

Protect hands and fingers from cutterhead; ensure knives are secure and sharp.

Safe Operation Practices

Workpiece Handling and Feeding

Power Connections

Damp Location Warning

Warning against operating the machine in wet conditions to prevent electrical hazards.

Grounding Instructions

Instructions for proper grounding to protect against electric shock.

Receptacle Grounding Verification

Emphasizes verifying the grounding status of the electrical receptacle.

Extension Cords

Key Features and Components

Product Specifications

Unpacking and Parts Identification

Assembly Instructions

Fence Assembly

Fence Angle Lock Assembly

Align Cutterhead to Outfeed Table

Procedure to ensure the cutterhead knives are level with the outfeed table.

Align Cutterhead to Outfeed Table (Continued)

Detailed steps for aligning cutterhead knives to the outfeed table for optimal performance.

Operation Procedures

Starting and Stopping the Jointer

Instructions on how to safely turn the jointer on and off.

Locking the Jointer Using the Safety Key

Adjusting Fence Position

Feeding Stock

How to safely feed wood stock through the jointer.

Jointing Beveled Stock

Instructions for setting up and jointing beveled edges on stock.

Setting Outward 45° Angle

Setting Inward 45° Angle

Instructions for setting the fence to an inward 45-degree angle.

Calibrating 45°;90° Stops

Calibrate 90° Stop

Calibrate 45° Inward and Outward Stops

Depth Adjustment

Maintenance Procedures

Changing Cutterhead Knives

Detailed instructions for safely replacing the jointer's cutterhead knives.