To Next PageTo Next Page
Need help?Do you have a question about the Delta 37-680 and is the answer not in the manual?
General| Planing Width | 13 inches |
|---|---|
| Feed Rate | 26 feet per minute |
| Weight | 6.5 pounds |
| Blade Length | 13 inches |
| Width Capacity | 13 inches |
| Cutterhead Speed | 10, 000 RPM |
| Voltage | 120V |
| Dust Port Size | 4 inches |
| Type | Planer |
| Motor Power | 15 Amp |
| Planing Depth | 1/8 inch |
| Motor | 15 Amp |
Essential safety guidelines, rules, and warnings for safe tool operation.
Defines safety symbols (DANGER, WARNING, CAUTION) and key terms.
Comprehensive list of general safety rules to follow while operating machinery.
Specific safety precautions tailored for jointer operation.
Essential instructions for connecting the machine to power safely and correctly.
Essential safety instructions for grounding the machine to prevent electric shock.
Lists all items included in the product packaging for unpacking.
Lists the tools necessary for assembling the machine.
Step-by-step instructions for attaching the jointer unit to its stand.
Procedures for turning the machine on and off using the start/stop buttons.
Steps for raising or lowering the infeed table for depth of cut.
Detailed guide on adjusting the jointer knives for precise cuts.
Instructions on how to operate and adjust the jointer fence.
Procedures for keeping the machine clean, lubricated, and rust-free.
Guide on how to sharpen the jointer knives using a carborundum stone.
Detailed procedures for handling, replacing, and resetting the jointer knives.
Information on obtaining parts, service, and warranty assistance.
