Need help?Do you have a question about the Delta 36-205 and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | 36-205 |
| Category | Power Tool |
| Language | English |
Custom fitting the miter slot key to the saw table for proper alignment and stability.
Securing the table board to the miter slot key using screws for a stable base.
Mounting the slide stop to prevent the jig from falling off the saw table.
Attaching the work clamp assembly to the main miter jig body for securing workpieces.
Connecting the miter jig body to the table board using a lock bar and handle.
Attaching the fence assembly to the miter jig body using locking bars and knobs.
Installing the stock stop assembly onto the fence rail for precise repetitive cuts.
Mounting the blade guard to the table board for safety during operation.
Positioning the slide stop bracket relative to the hex stop for accurate workpiece positioning.
Procedure to set and verify the 90-degree angle alignment of the fence.
Procedure to set and verify the 45-degree angle alignment of the fence.
To Next Page
