9
OPERATION
STARTING AND STOPPING SCROLL SAW
To reduce the risk of injury, make
sure that the switch is in the “OFF” position before
plugging cord into outlet. Do not touch the plug’s
metal prongs when unplugging or plugging in the
cord.
To turn the scroll saw on, press the front of the switch
provided in the switch for insertion of a padlock to lock
LOCKING SWITCH IN THE "OFF" POSITION
IMPORTANT:
switch should be locked
To reduce the risk of injury, in the event of
a power outage (such as a breaker or fuse trip), always
turn the tool "OFF" and unplug until the main power is
restored.
OPERATIONAL CONTROLS AND ADJUSTMENTS
FIG. 8
B
C
A
ATTACHING WORKLIGHT (40-692)
This scroll saw worklight is designed for use with your
other tool.
FOLLOW THESE RULES WHEN USING
THE INCLUDED LIGHT:
120 volt appliance bulb with a candelabra base.
Do not use a standard household bulb.
surface.
minutes before changing bulb.
scroll saw operation.
ASSEMBLY
Using the star wrench provided with the worklight,
the same screws, mount the worklight into the two holes
in the scroll saw housing, as shown.
Rotate the light switch clockwise to turn the light OFF and
ON.
FIG. 7A
To Next Page
Loading...
