Delta ASD-M-0721-F - Page 390

ASDA-M Chapter 8 Parameters
Revision December, 2014 8-159
P5-35 AC15
Acceleration/Deceleration Time
(Number #15)
Address: 0546H
0547H
Parameter
Attribute：
Parameter for individual axis
Related Section:
Section 7.10
Operational
Interface：
Panel / Software Communication
Default：
30
Control
Mode：
PR
Unit：
ms
Range：
1 ~ 65500
Data Size：
16bit
Format：
DEC
Settings：
The default value of this parameter is smaller (short deceleration
time) and it is used for short deceleration time and stops promptly
of auto protection.
P5-36 CAST
CAPTURE - Start Address of Data
Array
Address: 0548H
0549H
Parameter
Attribute：
Parameter for individual axis
Related Section:
Section 7.11.1
Operational
Interface：
Panel / Software Communication
Default：
0
Control
Mode：
ALL
Unit：
-
Range：
0 ~ (value set by P5-10 minus 1)
Data Size：
16bit
Format：
DEC
Settings：
The first data CAPTURE obtained should be saved in the address
of data array.
NOTE
It is writable only when COMPARE stops (please refer to P5-39)