Delta DVP-SS2

DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming
3-128
Program Example 4:
For DVP-EX2/SX2 only: When X0 = ON and M1180 = ON, A/D signal in D1110~D1113 will be
refreshed immediately regardless of the settings of operands D and n
X0
SET M1180
REF X0 K8
Program Example 5:
When M0 is ON, executing DDRVI instruction to output pulses. When an external interrupt occurs
in X0, the program refreshes the pulse number immediately in D1030, D1031 and D1336, D1337.
No need to wait for the scan.