DVP-ES2/EX2/EC5/SS2/SA2/SX2/SE&TP Operation Manual - Programming
Error code Description
H620D UDP Socket the length of sent data exceeds the range
H620E UDP Socket the device where data are sent exceeds the range
H620F UDP Socket illegal address for receiving data
H6210 UDP Socket the length of data actually received exceeds the range.
H6211 UDP Socket the device where data are received exceeds the range.
H6213 UDP Socket the size of data actually received is larger than the set data.
H6215 UDP Socket is not connected
H6217 UDP Socket connection has been triggered
When S
1
+4=1 (TCP mode)
Error code Description
H2003 The value exceeds the range.
H600C The local socket has been used.
H600D Ethernet network is not connected.
H6200 TCP Socket illegal IP address
H6201 Illegal TCP Socket communication mode setting
H6202 Illegal TCP Socket mode setting
H6203 TCP Socket illegal address for sending data
H6204 TCP Socket the length of sent data exceeds the range
H6205 TCP Socket the device where data are sent exceeds the range
H6206 TCP Socket illegal address for receiving data
H6207 TCP Socket the length of received data exceeds the range
H6208 TCP Socket the device for receiving data exceeds the range
H6212 TCP Socket communication timeout
H6213 TCP Socket the size of data actually received is larger than the set data.
H6214 TCP Socket connection is rejected by the remote equipment
H6215 TCP Socket has not been connected
H6217 TCP Socket connection has been triggered.
To Next Page
Loading...
Need help?
General
