Need help?Do you have a question about the Delta DVP02LC-SL and is the answer not in the manual?
General| Model | DVP02LC-SL |
|---|---|
| Input Voltage | 24 VDC |
| Analog Input Channels | 2 |
| Number of Digital Inputs | 8 |
| Number of Digital Outputs | 6 |
| Communication Ports | RS-232, RS-485 |
| Series | DVP |
| Product Series | DVP |
| Input Impedance | 10 MΩ |
| Current Consumption | 100 mA |
| Output Type | Relay |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -25°C to 70°C |
| Humidity | 5% to 95% RH (non-condensing) |
| Dimensions | 90 x 90 x 65 mm |
Lists the technical specifications and capabilities of the load cell module.
Explains the ENOB based on load cell eigenvalue and reaction time.
Provides the physical dimensions of the DVP02LC-SL module.
Identifies and labels the main components and ports of the module.
Details the pin assignments for CH1 and CH2 channel connections.
Explains the function of each LED status indicator on the module.
Describes the physical connection procedure between modules.
Outlines the steps for mounting modules onto a DIN rail.
Details the wiring and pin definitions for communication ports.
Illustrates how to wire load cells to the module's channels.
Lists and describes the control registers (CR) and their addresses.
Provides detailed explanations for specific control registers.
Explains specific functions of the load cell module.
Guides through the initial connection and communication setup.
Configures communication parameters for RS-232 and RS-485.
Sets up measurement parameters like units, times, and limits.
Details the zero point and weight base point correction procedures.
Explains how to view measuring results and status/error codes.
Describes how to perform correction using the PLC MPU.
Details the procedure for calibrating via the software interface.
Demonstrates using DVP02LC-SL in a tension control application.
Explains the meaning of all LED indicators on the module.
Lists common problems and their solutions for the module.
To Next Page
