Need help?Do you have a question about the Delta DVP20SX211T and is the answer not in the manual?
General| Model | DVP20SX211T |
|---|---|
| I/O Points | 20 |
| Analog Inputs | 0 |
| Analog Outputs | 0 |
| Power Supply | 24V DC |
| Communication Ports | RS-232, RS-485 |
| Programming Software | WPLSoft |
| Program Memory | 8K steps |
| Pulse Output | 2 |
| Operating Temperature | 0°C to 55°C |
| Series | DVP |
| Type | Controller |
| High-speed Counters | 2 |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10 to 90% RH |
Mounting the PLC using M4 screws as per product dimensions.
Mounting the PLC onto a 35mm DIN rail using retaining clips.
Precautions for safe PLC installation within a control cabinet.
Details regarding the DC power input requirements for the DVP-SX2 series.
Instructions for wiring DC input points, covering SINK and SOURCE modes.
Guidelines for wiring relay and transistor output points.
Diagrams illustrating external connections for active/passive A/D and D/A.
Recommended wiring procedures for RS-485 communication.
To Next Page
