EasyManua.ls Logo

Delta NC200 - Page 25

Delta NC200
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English-1
Preface
Thank you for choosing this product. Before using the product, please read through this
quick start carefully in order to ensure the correct use of the product. In addition, please
place this quick start safely for reference whenever is needed. Before finishing reading this
manual, please follow the rules below:
No water, corrosive gas and inflammable gas are allowed in the installation
environment.
Please follow the instruction of pin assignment as described in NC Series User
Manual for Operation and Maintenance when wiring. Ground is a must.
To prevent electric shock, please do not disconnect the controller, change the
wiring, or touch the power source while power is being supplied.
Please consult the distributors or DELTA customer service center if any problem occurs.
The content of this quick start may be revised without prior notice, please contact with
distributors or download the latest version at http://www.delta.com.tw/ia/.
Safety Precautions
Installation
Please follow the installation instructions in this manual; otherwise, it may
cause damage to the equipment.
It is prohibited to expose the product to the environment containing water,
corrosive gas, and inflammable gas. Otherwise electric shock or fire may
occur.
Wiring
Please connect the ground terminal to class-3 ground system (under
100 ). Poor grounding may result in communication failure, electric
shock or fire.
Before Operation
Correctly plan for I/O actions with MLC Editor Software, or abnormal
results may occur.
Before operation, please properly adjust the parameter settings of the
machine; otherwise, it may cause abnormal operation.
Please ensure the emergency stop can be activated at any time and avoid
operating the machine in unprotected condition.
Operation
Do not modify wiring while power is being supplied, otherwise it may
cause personal injury due to electric shock.
Never use a sharp-pointed object to touch the panel, as doing this might
dent the screen and lead to malfunction of the controller.

Related product manuals