To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Delta S Series and is the answer not in the manual?
General| Brand | Delta |
|---|---|
| Model | S Series |
| Category | Power Tool |
| Language | English |
Defines roles like Operator, Program editor, and Repair/inspection personnel.
Explains the meanings of danger, warning, stop, and noise prevention symbols used in the manual.
Provides critical safety guidelines for installing the servo press and controller to prevent damage and injury.
Covers safety for operation, maintenance, and general precautions.
Emphasizes proper maintenance, locking power, avoiding foreign objects, and using genuine parts.
Presents a diagram showing the front and side views of the S-Series servo press and its system connections.
Covers manual modes, operation buttons, and emergency stop functionality.
Shows the I/O signal contacts and connectors located on the rear of the machine.
Guides on connecting the power line to the servo press and the power supply, specifying a minimum distance.
Provides instructions for safely transporting servo press models, including lifting points and weights.
Details fastening ports and screw specifications for attaching S005/S010 and S030/S050 models.
Specifies dimensions for producing processing jigs for different servo press models.
Provides recommended punch jig design and dimensions for the S005/S010 models.
Provides recommended punch jig design and dimensions for the S030/S050 models.
Details precautions regarding jig weight limits and center alignment for spindle punch operations.
Lists daily, monthly, and semi-annual inspection items for maintaining the servo press.
Advises on preventing rust on the working surface and replenishing lubricating oil for the spindle and ball screw.
Explains the process and frequency for pressure inspection, calibration, and the causes of abnormal values.
Provides specifications for replacement belts and outlines the step-by-step replacement procedure.
