To Next PageTo Next Page
Need help?Do you have a question about the Delta B.O.S.S. SA350 and is the answer not in the manual?
Requirements for electrical circuits and extension cords.
Details on the machine's voltage, frequency, and motor type.
Essential guidelines for safe electrical grounding to prevent shock.
Introduction to the machine's features and specifications.
Procedures for unpacking, cleaning, and preparing the machine.
Step-by-step guide for installing the spindle adapter.
Instructions for installing sanding drum, sleeve, and table insert.
How to connect the dust bag to the machine's dust chute.
Steps to fasten the sander to a supporting surface for stability.
Instructions for operating the on/off switch.
Procedure to prevent unauthorized use by removing the switch toggle.
Steps for replacing abrasive sleeves and sanding drums.
Illustrates sanding inside curves and general operation tips.
Information on available accessories and warnings for non-Delta products.
Contact information for parts, service, and warranty support.
Details of the manufacturer's limited warranty policy.
General
