To Next PageTo Next Page
Need help?Do you have a question about the Delta 31-250 and is the answer not in the manual?
General| Type | Oscillating Spindle Sander |
|---|---|
| Dust Collection | Yes |
| Dust Port | 2-1/2 inches |
| Spindle Sizes | 1/2, 1-1/2, 2 inches |
| Spindle Speed | 1, 725 RPM |
Explains safety symbols, hazard levels, and provides general warnings for equipment use.
Presents fundamental safety principles applicable to all machinery operations.
Lists essential safety rules to prevent accidents and injuries during machine operation.
Outlines specific safety measures and best practices for using the drum sander.
Details electrical circuit, wiring, and connection specifications for safe operation.
Explains the critical importance and procedure for grounding the machine to prevent electric shock.
Provides guidance on selecting appropriate extension cords for the machine.
Describes the primary features and capabilities of the drum sander.
Instructions for safely removing the machine from its packaging and performing initial cleaning.
Identifies the various parts of the drum sander included in the package.
Lists all items found within the shipping container, including the machine and accessories.
Step-by-step guide for securely mounting the machine's support legs.
Instructions for installing the handwheel used for table height adjustments.
Procedure for mounting and ensuring the feed table is properly aligned and level.
Guide for installing the thickness scale for accurate depth measurements.
Steps to connect the feed motor to the feed-speed switch assembly.
How to operate the main power switch, feed switch, and secure the machine.
Explains the function and usage of the table feed and speed adjustment control.
Instructions for raising or lowering the feed table using the handwheel.
Procedures for checking and adjusting the feed belt's tracking and tension.
Steps to ensure the feed table is perfectly parallel with the drum cylinder.
Guide for calibrating the table height scale for accurate material thickness settings.
Instructions for altering the drum's rotational speed by reconfiguring the drive belt.
Detailed procedure for removing and installing the sanding belt onto the drum.
Instructions for removing and installing the feed belt on the machine.
Guidance on connecting the machine to a dust collection system for efficient dust removal.
Discusses belt grit, board width, wood type, and feed speed's impact on sanding results.
Covers causes of burn marks, stock size limits, and sanding warped boards.
Techniques for sanding multiple boards, board edges, and glued boards.
Methods for sanding boards wider than 18 inches and boards with glued joints.
Guidance for new users and tips to maximize sanding belt lifespan.
Instructions for adjusting the timing belt tension to ensure smooth table movement.
Verifying the proper mounting and parallelism of the table support plate.
Steps to check and adjust the lock nut on the elevating screws for accurate sanding.
Ensuring proper alignment of bushings for smooth and precise table adjustments.
Regular cleaning, oiling, and belt checks for optimal machine performance.
Guidance on checking and replacing worn carbon brushes in the motors.
Explains the overload protection mechanisms for both the drum and feed belt motors.
Information on obtaining accessories, parts, and service for the machine.
Outlines the two-year limited warranty and how to get service assistance.
