To Next PageTo Next Page
Need help?Do you have a question about the Delta 31-483 and is the answer not in the manual?
General| Type | Oscillating Spindle Sander |
|---|---|
| Motor Power | 1/2 HP |
| Spindle Speed | 1725 RPM |
| Spindle Stroke | 1/2 inch |
| Dust Collection | Yes |
| Spindle Sizes Included | 1-1/2 inch |
| Table Tilt | 0-45 degrees |
| Dust Port | 2-1/2 inch |
Explains the meaning of danger, warning, and caution symbols used in the manual.
Lists essential rules to follow for safe operation and to prevent injury.
Details the electrical requirements and specifications of the sander's motor.
Critical steps for properly grounding the machine to prevent electric shock.
Identifies and describes the main parts and features of the sander.
Lists technical specifications such as oscillation rate, spindle speed, and weight.
Instructions and warnings for safely removing the sander from its shipping container.
Step-by-step guide for attaching sanding sleeves to the spindles.
Procedure for securely attaching spindles to the machine seat.
Guide for choosing and fitting table inserts based on spindle size.
Steps for connecting the sander to a dust collection system.
Details on the machine's integrated storage for spindles and inserts.
How to tilt the table to the desired angle for sanding.
Procedure to ensure the table surface is perpendicular to the spindle.
Information regarding the lubrication of machine bearings.
Recommended periodic checks for hardware, dust, and component condition.
Step-by-step guide for removing and installing sanding sleeves.
Guidance on obtaining and using identical replacement parts for the machine.
Information on how to obtain replacement warning labels.
Information on locating service centers and obtaining repairs.
