Delta Electric Servo Press - S Series
Installation and Maintenance Instructions
22
2. Please replenish the lubricating oil for the spindle and screw in time according to the usage
conditions and the life of the machine. Supply the oil at the position of the oil supply hole as
shown in the figure.
(Recommended lubrication maintenance frequency: 1 year)
* Recommended oil: Castrol EPL1 or NSK LR3
* Recommended Grease Gun :KCG-470H (Brand
：
Alba),
as shown in the picture
* Single oil injection_ S005/S010 ,Spindle : 10 ml
* Single oil injection _ S030/S050 ,Spindle
：
20 ml
* Single oil injection _ S005/S010, Ball screw
：
2 ml
* Single oil injection _ S030/S050, Ball screw
：
32 ml
Caution: When replenishing lubricating oil, please turn off the main power first.
Spindle
To Next Page
Loading...
