◼ Please read this manual carefully before installing in order to make sure that
the servo press and controller are installed at suitable usage locations and
environments, to avoid affecting the mechanisms and usage life of the
electronic components or encountering other safety problems.
◼ Please do not modify the machine or wiring by yourself or use with other
controllers or servo press. Our company will not be held responsible for any
injuries or fatalities caused by accidents that result from doing so.
◼ Please follow the instructions in this manual properly to transport and install
the servo press and controller correctly; otherwise it might result in damage to
the servo press or controller.
◼ Related licenses are required to operate stackers or fork lifts etc.
◼ Please wear proper safety work clothes, helmets, gloves and shoes when
installing the servo press and controller in order to ensure the safety of
personnel.
◼ Do not add additional cables or hoses etc. inside the servo press. When
installing the exterior cables of the servo press, make sure to assess whether
the cables and mechanisms will interfere with one another during operations.
◼ The servo press itself is applicable for environment IP20 and is able to resist
solid matters with diameters over 12mm and lengths not exceeding 80mm,
such as fingers; it is not protected against any liquid matter.
◼ Please follow the manual to install the safety protection devices such as fence,
light curtain etc. in order to prevent injuries or other dangers caused to the
staff arising from impact by the servo press within the operating range of the
servo press.
◼ Please install the final system integration of the user operating buttons and
warning lights etc. outside the fence in order to ensure usage safety. The height
of the operating interface should be a suitable (0.6m to 1.7m) range for
operators to touch.
◼ Please do not turn the power on and off frequently as doing so may result in
damage to the controller.
◼ The servo press system should be installed under the specified conditions; in
the foreseeable usage period, the servo press cannot be tilted or moved with
uncontrolled methods during transportation, assembly, dis-assembly,
suspended or discarded periods.
◼ Please properly ground all servo press systems; they should all be grounded
before connecting the power.
◼ The final system integrator should install protection devices in order to prevent
users from getting close to the danger area.
◼ Do not bypass the interlock circuit.
◼ Removing or changing the locations of any safety warning labels is strictly
prohibited as doing so may cause danger to the staff and to cause injuries.
◼ Performing any unsafe actions at the safety warning locations is strictly
prohibited as doing so may cause injuries to the staff.
◼ Personnel must not stand beneath when stackers or fork lifts, etc. are used to
move the servo press as doing so may result in injuries or other dangers.
To Next Page
Loading...
Need help?
General
