To Next PageTo Next Page
Need help?Do you have a question about the Delta UNISAW 34-806 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Blade Diameter | 10 inches |
| Table Size | 20 x 27 inches |
| Arbor Size | 5/8 inches |
| Maximum Depth of Cut at 90 Degrees | 3-1/8 inches |
| Maximum Depth of Cut at 45 Degrees | 2-1/4 inches |
| Motor Power | 1-1/2 HP |
Explains DANGER, WARNING, and CAUTION symbols used in the manual.
Covers essential safety practices for machine operation, workspace, and operator conduct.
Details additional safety rules, kickback causes, and methods to prevent it.
Requirements for electrical circuits, grounding, and voltage for safe machine operation.
Instructions for fitting the blade guard and splitter assembly.
Ensures splitter alignment and installs the saw blade.
Setting accurate 90° and 45° blade positioning stops.
How to perform cross-cuts safely using the miter gauge.
Guide for safe ripping operations using the rip fence.
Instructions for operating the moulding cutterhead accessory.
Guide for cutting grooves with the dado head set.
Step-by-step guide for replacing the saw blade.
