To Next PageTo Next Page
Need help?Do you have a question about the Delta UNISAW 34-801 and is the answer not in the manual?
Covers reading the manual, keeping guards in place, and verifying tool condition before use.
Emphasizes wearing eye protection, maintaining a clean work area, and keeping children away.
Details correct tool usage, staying alert, avoiding hazards like dust and chemicals, and proper shutdown.
Ensures proper machine assembly, electrical code compliance, and safe wiring practices.
Provides techniques to avoid kickback and ensures safe workpiece handling during cuts.
Instructs users to keep hands clear of the blade, avoid awkward positions, and maintain safe distances.
Specifies required wire gauge, fuse protection, and extension cord types for safe power connection.
Details the necessity of grounding for shock protection and correct grounding plug connections.
Outlines the voltage and connection requirements for 5 HP Unisaw motors.
Provides a chart for selecting the correct gauge extension cord based on amperage and length.
Instructions for unpacking, removing protective coatings, and initial cleaning of the saw.
Step-by-step guide for assembling the blade tilting mechanism handle.
Instructions for attaching the extension wing to the saw table.
Procedure for mounting the LVC magnetic starter box to the saw cabinet.
Guidance on installing the LVC ON/OFF switch to the extension wing.
Instructions for installing the GPE ON/OFF switch assembly.
Detailed steps for assembling the blade guard and splitter components.
Instructions for fastening the motor power cord to the saw frame using a cable tie.
Steps for correctly attaching the motor cover, including clip engagement.
Guide for mounting the holder for the miter gage and arbor wrenches.
Instructions for assembling the rip fence holder brackets to the saw cabinet.
Procedure for attaching the dust chute adapter for dust collection systems.
Details on using the ON/OFF buttons and securing the saw in the OFF position with a padlock.
Explains operation of handwheels for blade height adjustment and tilting mechanism.
Guide for checking and adjusting the positive stops for accurate 90 and 45-degree blade positioning.
Procedure for checking and adjusting the saw table for parallelism with the blade.
Instructions for ensuring the table insert is level with the main table surface.
Details on inserting, adjusting, and using the miter gage for accurate angled cuts.
Step-by-step instructions for safely removing and installing a new saw blade.
Guide for replacing worn belts and adjusting belt tension for optimal performance.
Methods and materials for cleaning and protecting the cast iron table surface.
Detailed explanation of how to perform cross-cutting safely and effectively using the miter gage.
Instructions on using the rip fence for accurate repetitive cross-cuts.
Comprehensive guide on performing lengthwise cuts (ripping) safely with the rip fence.
Guidance on adding wood facing to the rip fence for specialized operations like moulding.
Instructions for using the moulding cutterhead for shaping wood edges.
Procedure for installing and safely using the dado head set for grooving operations.
Dimensions and instructions for building a featherboard to improve workpiece control.
Pattern and instructions for creating a push stick for safe workpiece feeding.
Information on the Deluxe Uniguard Blade Guard accessory.
Details on the Biesemeyer T-Square Table Saw Blade Guard System accessory.
Caution against using non-Delta accessories due to potential hazards.
Contact information for obtaining parts, service, and warranty support.
General